Gloss Tools

Download Time Calculator

You know the file size and your plan's rated speed, but one is measured in bytes and the other in bits, so mental math is off by a factor of eight. Enter the file size, connection speed, and efficiency to see how long the download takes, when to start tonight, and when it will finish. The speed is a fixed estimate; nothing measures your real network.

Input

Above 0, at most 9999.999, with up to three decimal places.

Decimal SI (KB, MB, GB, TB) and binary IEC (KiB, MiB, GiB, TiB) units are separate choices; both conversions are exact and there is no unit-system toggle.

From 0.01 to 999999.999, with up to three decimal places. The common speeds below are fill-in shortcuts only.

Mbps is measured in bits; MB/s in bytes — a factor of eight apart.

A whole-number reduction factor from 1 to 100. The default is 100, no reduction; 90 calculates with 90% of the rated speed.

Local time in HH:MM format (00:00 to 23:59). Left blank, the moment you press Calculate is used.

Nothing calculated yet. Enter a file size and speed, or load the example.

How it is calculated

The file size is first converted to bytes (1 byte = 8 bits): SI units multiply by 1000 per step, IEC units by 1024 per step, and the two families are separate choices, each exact. Seconds needed = file bytes × 8 ÷ (rated speed × efficiency ÷ 100), computed as an exact rational number throughout. The displayed total seconds are rounded half-up; the finish time is derived from the unrounded exact duration (whole seconds only), so the two can differ by under a second.

Duration format: H:MM:SS at or above one hour (hours may exceed 24 and never roll into days), M:SS below one hour, 0:SS below one minute. A finish on a later day is marked +Nd. The report file download-time-report.json contains this run's result as fixed-format JSON.

Frequently asked questions

Why isn't a 100 MB file done in 1 second at 100 Mbps?
Speed is measured in bits and file size in bytes; 1 byte = 8 bits, so it takes about 8 seconds.
What is efficiency?
Protocol overhead and real-world conditions make the effective speed lower than the rated one; 90 uses 90% of the rated speed. The default is 100, no reduction.

All calculation happens locally in this page; your input is not uploaded, stored, or logged.